Home Computer Network Powerline Ethernet Adapter.
View PDF | Print View
by: Guest
Total views: 40
Word Count: 697
Build a network of computers at home with two large plans is more difficult than in a house with one floor building and it is sometimes frustrating.
Thick concrete building generally contributes signal attenuation and dead spots in wireless.
Running network cable is hard work.
But Powerline Ethernet adapter helps you build the network easily.
If you have a network of computers at home from scratch, consisting of the first floor where the cable / DSL Internet connection and starts on the second floor, where you want to create or enhance the wireless network, you must assess your needs for your needs.
On the first floor, how many computers you need, how you connect them - wired or wireless.
On the second floor, this is important, because you in the first floor, second floor, where its thick concrete building an obstacle, if you need a network cable or wireless access link.
In the first floor where your router gateway (with 4x Ethernet ports) is located connects two desktop computers which are close each other with the gateway router - a wired connection for each of the computer is easier.
You only need to run a network cable UTP each desktop computer with the Ethernet ports on the router.
Now the challenge is how to connect several laptops with Wi-Fi enabled and other Ethernet based devices in the second floor to allow them connect and access the Internet? You have two options - you run a network cable from the first floor to the second floor, or you provide wireless access from the first floor to the second floor clients.
To run a network cable from the first floor on the second floor, you probably have an additional effort by the drilling of the hole or run the mess of wires that look just messy.
You can install a wireless access point in the first floor and allow client computers in the second floor connect wirelessly.
But would the construction of cement thickness between the first and second floors to the wireless signal strength received from the client computer on the second floor significantly weaker.
Your wireless performance in the second floor would be unsatisfactory.
The easiest way for the computer network of the two-story house like this is to install an Ethernet Powerline Adapter into the foreground and another adapter into the background.
With Powerline Ethernet adapter, you can create high-speed secure building wide network using the power outlets in a single circuit breaker.
The Trendnet TPL-401E2K Powerline Ethernet Adapter is an adapter for the new generation high-speed velocity of up to 500Mbps (in theory) through the outlet.
In this case, you can install one TPL-401E2K in the first floor and connect to the Ethernet port of your router gateway.
And then you can customize the installation of additional Powerline Adapters plugged each of the sockets in the house as needed for your needs.
Install one adapter in the second floor where you would like to install the wireless access point.
What this 401E2K The Trendnet TPL TPL 401E2K Powerline Ethernet Adapter is an adapter via high-speed delivery of electrical outlets at up to 500Mbps (in ideal conditions).
The adapter is equipped with one Gigabit Ethernet port which is ideal in delivering high speed applications such as streaming High Definition (HD) media and smooth gaming.
You can provide up to 16 network adapters.
For security connection, the adapter supports advanced 128-bit AES data encryption.
One thing that the distribution of Powerline Ethernet adapters in a building that must remember the cards in one system switch.
If there are two circuit breaker systems in your building, to cover the whole building network you need to make a link between the circuit breakers.
You must install an adapter to a switch and as to another adapter in and connect the other bridge.
Now you can successfully build your home computer network providing wired connection in the first floor and wireless access in the second floor using the TPL-401E2K Powerline Ethernet adapter as a bridge between the floors via power outlets eliminating the clutter of the wires.
With Ki Grinsing.
About the Author
Visit our Website: computer networks For more exclusive informations.
Rating: Not yet rated
Comments
No comments posted.Add Comment
You do not have permission to comment. If you log in, you may be able to comment.